Paptizer 360 UV-C CPAP Mask Sanitizer
A cleaner CPAP mask. Every night. Zero effort.
The LiViliti Paptizer 360 uses 40 UV-C LEDs to reduce bacteria on your mask cushion in one hands-off 30-minute cycle.
- No chemicals
- Ozone-free
- Nothing to reorder
Your mask touches your face every night.
Keeping it fresh shouldn't be a chore.
Most CPAP users know the routine, and most of us skip it more often than we'd like to admit.
The Paptizer 360 adds a simple step: place it, press start, walk away.
Three steps. Then it runs itself.
No rinsing, no drying time, no guesswork. Your mask is ready the moment the cycle ends.

Place one cushion, facing up
Set it on the quartz glass tray so light reaches the surfaces that touch your skin.

Close the lid, press START
The LCD counts down 30 minutes. Open the lid and the LEDs shut off instantly.

Walk away
The unit turns itself off. Nothing to rinse, wipe or reorder.
Built for one job, and cleared to do it
An FDA-cleared UV-C LED microbial reduction device for single-patient home use.
40 UV-C LEDs
260–280 nm, rated for up to 10,000 hours. No bulbs or filters to change.
30-minute cycle
LCD countdown with automatic shut-off. Four simple buttons: ON, START, PAUSE, OFF.
Lid safety sensor
Open the lid mid-cycle and the LEDs cut out. No UV-C exposure to eyes or skin.
360° quartz glass tray
UV-C passes through the tray for coverage all around the cushion.
Ozone-free, no chemicals
Light does the work. No soap, no water, no lingering smell.
Nothing to reorder
No cartridges, filters or subscriptions. Backed by a 2-year warranty.
No cartridges. No filters. No subscription.
LEDs rated for up to 10,000 hours means nothing wears out on a schedule, and nothing to reorder every month.
Get the Paptizer 360 →How it compares
Keep washing your mask as the manufacturer recommends. The Paptizer 360 adds a hands-off step on top.
| Paptizer 360 | Ozone cleaners | Wipes and sprays | |
|---|---|---|---|
| FDA-cleared (510(k)) | ✓ | Varies | Varies |
| Ozone-free | ✓ | ✕ | ✓ |
| No chemicals or residue | ✓ | ✓ | ✕ |
| No refills or filters | ✓ | Varies | ✕ |
| Hands-off, auto shut-off | ✓ | ✓ | ✕ |
Lab tested. Results you can read.
in-vitro bacterial reduction (2-log) after one complete cycle, tested on Paptizer 360 production units with ResMed AirFit F20 mask cushions.* Tested against six species commonly found on CPAP masks:

Everything you need to start tonight
- Paptizer 360 unit
- USB-C power supply
- Quartz glass tray
- Suction cup for lifting the tray
- User manual
11.89 × 10.59 × 6.06 in, about 5 lb with tray. Built-in carry handle.
Get the Paptizer 360 →
Common questions
What does the Paptizer 360 clean?
It is designed for CPAP mask cushions: one cushion per 30-minute cycle, placed with the opening facing up. It is intended as an adjunct to reduce bacterial populations on compatible home-use CPAP masks.
Do I still need to wash my mask?
Yes. The Paptizer 360 adds to, and does not replace, the cleaning steps recommended by your CPAP mask manufacturer.
Is it safe to use at home?
Yes. A lid safety sensor turns the LEDs off as soon as the lid opens, so there is no UV-C exposure to eyes or skin. The process is ozone-free. It is intended for adult, single-patient home use.
Do I need to buy refills or replacement bulbs?
No. There are no filters, cartridges or bulbs. The LEDs are rated for up to 10,000 hours.
What is the warranty?
2 years on the unit and power supply, and 30 days on the quartz glass tray.
Why can't I see the price?
Log in to your Monitor Medical account to see pricing and order. A prescription may be required to ship this product, and you can upload it on the product page.
Make mask care the easiest part of your night.
Place it, press start, walk away. A cleaner CPAP mask cushion in 30 minutes, every night.
Get the Paptizer 360 →
*An in-vitro 2-log (99%) bacterial reduction has been demonstrated after a complete processing cycle, tested with ResMed AirFit F20 mask cushions. Any correlation between in-vitro results and clinical outcome has not been established. This device must not be used to replace the cleaning procedures recommended by CPAP mask manufacturers.



