Skip to product information
1 of 14

LiViliti

LiViliti Paptizer 360 UV-C LED CPAP Mask Sanitizer – FDA-Cleared

LiViliti Paptizer 360 UV-C LED CPAP Mask Sanitizer – FDA-Cleared

SKU:LIV-T5L

Regular price Login to see price
Regular price Login to see price Sale price Login to see price
Sale Sold out
Shipping calculated at checkout.

Clean your CPAP mask cushion with light, not chemicals. The LiViliti Paptizer 360 is an FDA-cleared UV-C LED device that reduces bacteria on your mask cushion in one hands-off 30-minute cycle. No water, no filters, no cartridges, nothing to reorder.

FDA-Cleared
510(k) Class II device
99%
in-vitro bacterial reduction*
30 Min
one cycle, auto shut-off
2-Year
warranty, unit and power supply

How it works

1
Place one cushion, facing up. Set it on the quartz glass tray with the opening up so light reaches the surfaces that touch your skin.
2
Close the lid and press START. The LCD counts down 30 minutes. Open the lid and the LEDs shut off instantly.
3
Walk away. The unit turns itself off. Nothing to rinse or wipe, and your mask is ready to use right away.
Paptizer 360 open with a CPAP mask cushion on the quartz tray Paptizer 360 control buttons and LCD countdown timer

Why it stands out

  • ✓40 UV-C LEDs (260–280 nm) rated up to 10,000 hours. No bulbs or filters to replace.
  • ✓360° quartz glass tray lets UV-C pass through for coverage all around the cushion.
  • ✓Lid safety sensor means no UV-C exposure to eyes or skin.
  • ✓Lab tested on six species commonly found on CPAP masks: S. aureus, S. epidermidis, P. aeruginosa, K. pneumoniae, S. pyogenes and E. coli.
  • ✓Ozone-free, no consumables and no subscription.
  • ✓Carry handle and USB-C power for the nightstand or bathroom counter.
Paptizer 360 plugged in on a kitchen counter
Specifications
Light source 40 UV-C LEDs, 260–280 nm
LED life Up to 10,000 hours
Cycle 30 minutes, automatic shut-off
Power input 18 V / 1.5 A, 27 W, USB Type-C
Dimensions 11.89 × 10.59 × 6.06 in (302 × 269 × 154 mm)
Weight 4.98 lb with tray (unit 4.07 lb, tray 0.91 lb)
Operating temp 41–104 °F
Storage temp -13–158 °F
Humidity 15–90%
Emissions Group 1, Class B
Use Adult, single-patient home use, one cushion per cycle
Warranty 2 years unit and power supply, 30 days quartz tray
Service life Discontinue use after 5 years
What's in the box
  • Paptizer 360 unit
  • USB-C power supply
  • Quartz glass tray
  • Suction cup for lifting the tray
  • User manual
Paptizer 360 box contents and user manual
Safety and use
  • The lid sensor turns the LEDs off when opened, so there is no UV-C exposure to eyes or skin.
  • Keep plugged in for the full cycle.
  • Keep away from water and liquids.
  • For adults, single-patient home use.
  • Use alongside, not instead of, your mask manufacturer's cleaning instructions.

*An in-vitro 2-log (99%) bacterial reduction has been shown after a complete cycle, tested with ResMed AirFit F20 mask cushions on Paptizer 360 production units. Any correlation between in-vitro results and clinical outcome has not been established. This device must not be used to replace the cleaning procedures recommended by CPAP mask manufacturers.

View full details